Tag Archives: scope

Problems caused for students by the two languages of math

The two languages of math

Mathematics is communicated using two languages: Mathematical English and the symbolic language of math (more about them in two languages).

This post is a collection of examples of the sorts of trouble that the two languages cause beginning abstract math students. I have gathered many of them here since they are scattered throughout the literature. I would welcome suggestions for other references to problems caused by the languages of math.

In many of the examples, I give links to the literature and leave you to fish out the details there. Almost all of the links are to documents on the internet.

There is an extensive list of references.

Conjectures

Scattered through this post are conjectures. Like most of my writing about difficulties students have with math language, these conjectures are based on personal observation over 37 years of teaching mostly computer engineering and math majors. The only hard research of any sort I have done in math ed consists of the 426 citations of written mathematical writing included in the Handbook of Mathematical Discourse.

Disclaimer

This post is an attempt to gather together the ways in which math language causes trouble for students. It is even more preliminary and rough than most of my other posts.

  • The arrangement of the topics is unsatisfactory. Indeed, the topics are so interrelated that it is probably impossible to give a satisfactory linear order to them. That is where writing on line helps: Lots of forward and backward references.
  • Other people and I have written extensively about some of the topics, and they have lots of links. Other topics are stubs and need to be filled out. I have probably missed important points about and references to many of them.
  • Please note that many of the most important difficulties that students have with understanding mathematical ideas are not caused by the languages of math and are not represented here.

I expect to revise this article periodically as I find more references and examples and understand some of the topics better. Suggestions would be very welcome.

Intricate symbolic expressions

I have occasionally had students tell me that have great difficulty understanding a complicated symbolic expression. They can’t just look at it and learn something about what it means.

Example

Consider the symbolic expression \[\displaystyle\left(\frac{x^3-10}{3 e^{-x}+1}\right)^6\]

Now, I could read this expression aloud as if it were text, or more precisely describe it so that someone else could write it down. But if I am in math mode and see this expression I don’t “read” it, even to myself.

I am one of those people who much of the time think in pictures or abstractions without words. (See references here.)

In this case I would look at the expression as a structured picture. I could determine a number of things about it, and when I was explaining it I would point at the board, not try to pronounce it or part of it:

  • The denominator is always positive so the expression is defined for all reals.
  • The exponent is even so the value of the expression is always nonnegative. I would say, “This (pointing at the exponent) is an even power so the expression is never negative.”
  • It is zero in exactly one place, namely $x=\sqrt[3]{10}$.
  • Its derivative is also $0$ at $\sqrt[3]{10}$. You can see this without calculating the formula for the derivative (ugh).

There is much more about this example in Zooming and Chunking.

Algebra in high school

There are many high school students stymied by algebra, never do well at it, and hate math as a result. I have known many such people over the years. A revealing remark that I have heard many times is that “algebra is totally meaningless to me”. This is sometimes accompanied by a remark that geometry is “obvious” or something similar. This may be because they think they have to “read” an algebraic expression instead of studying it as they would a graph or a diagram.

Conjecture

Many beginning abstractmath students have difficulty understanding a symbolic expression like the one above. Could this be cause by resistance to treating the expression as a structure to be studied?

Context-sensitive pronunciation

A symbolic assertion (“formula” to logicians) can be embedded in a math English sentence in different ways, requiring the symbolic assertion to be pronounced in different ways. The assertion itself is not modified in any way in these different situations.

I used the phrase “symbolic assertion” in abstractmath.org because students are confused by the logicians’ use of “formula“.
In everyday English, “$\text{H}_2\text{O}$” is the “formula” for water, but it is a term, not an assertion.

Example

“For every real number $x\gt0$ there is a real number $y$ such that $x\gt y\gt0$.”

  • In the sentence above, the assertion “$x\gt0$” must be pronounced “$x$ that is greater than $0$” or something similar.
  • The standalone assertion “$x\gt0$” is pronounced “$x$ is greater than $0$.”
  • The sentence “Let $x\gt0$” must be pronounced “Let $x$ be greater than $0$”.

The consequence is that the symbolic assertion, in this case “$x\gt0$”, does not reveal that role it plays in the math English sentence that it is embedded in.

Many of the examples occurring later in the post are also examples of context-sensitive pronunciation.

Conjectures

Many students are subconsciously bothered by the way the same symbolic expression is pronounced differently in different math English sentences.

This probably impedes some students’ progress. Teachers should point this phenomenon out with examples.

Students should be discouraged from pronouncing mathematical expressions.

For one thing, this could get you into trouble. Consider pronouncing “$\sqrt{3+5}+6$”. In any case, when you are reading any text you don’t pronounce the words, you just take in their meaning. Why not take in the meaning of algebraic expressions in the same way?

Parenthetic assertions

A parenthetic assertion is a symbolic assertion embedded in a sentence in math English in such a way that is a subordinate clause.

Example

In the math English sentence

“For every real number $x\gt0$ there is a real number $y$ such that $x\gt y\gt0$”

mentioned above, the symbolic assertion “$x\gt0$” plays the role of a subordinate clause.

It is not merely that the pronunciation is different compared to that of the independent statement “$x\gt0$”. The math English sentence is hard to parse. The obvious (to an experienced mathematician) meaning is that the beginning of the sentence can be read this way: “For every real number $x$, which is bigger than $0$…”.

But new student might try to read it is “For every real number $x$ is greater than $0$ …” by literally substituting the standalone meaning of “$x\gt0$” where it occurs in the sentence. This makes the text what linguists call a garden path sentence. The student has to stop and start over to try to make sense of it, and the symbolic expression lacks the natural language hints that help understand how it should be read.

Note that the other two symbolic expressions in the sentence are not parenthetic assertions. The phrase “real number” needs to be followed by a term, and it is, and the phrase “such that” must be followed by a clause, and it is.

More examples

  • “Consider the circle $S^1\subseteq\mathbb{C}=\mathbb{R}^2$.” This has subordinate clauses to depth 2.
  • “The infinite series $\displaystyle\sum_{k=1}^\infty\frac{1}{k^2}$ converges to $\displaystyle\zeta(2)=\frac{\pi^2}{6}\approx1.65$”
  • “We define a null set in $I:=[a,b]$ to be a set that can be covered by a countable of intervals with arbitrarily small total length.” This shows a parenthetical definition.
  • “Let $F:A\to B$ be a function.”
    A type declaration is a function? In any case, it would be better to write this sentence simply as “Let $F:A\to B$”.

David Butler’s post Contrapositive grammar has other good examples.

Math texts are in general badly written. Students need to be taught how to read badly written math as well as how to write math clearly. Those that succeed (in my observation) in being able to read math texts often solve the problem by glancing at what is written and then reconstructing what the author is supposedly saying.

Conjectures

Some students are baffled, or at least bothered consciously or unconsciously, by parenthetic assertions, because the clues that would exist in a purely English statement are missing.

Nevertheless, many if not most math students read parenthetic assertions correctly the first time and never even notice how peculiar they are.

What makes the difference between them and the students who are stymied by parenthetic assertions?

There is another conjecture concerning parenthetic assertions below.

Context-sensitive meaning

“If” in definitions

Example

The word “if” in definitions does not mean the same thing that it means in other math statements.

  • In the definition “An integer is even if it is divisible by $2$,” “if” means “if and only if”. In particular, the definition implies that a function is not even if it is not divisible by $2$.
  • In a theorem, for example “If a function is differentiable, then it is continuous”, the word “if” has the usual one-way meaning. In particular, in this case, a continuous function might not be differentiable.

Context-sensitive meaning occurs in ordinary English as well. Think of a strike in baseball.

Conjectures

The nearly universal custom of using “if” to mean “if and only if” in definitions makes it a harder for students to understand implication.

This custom is not the major problem in understanding the role of definitions. See my article Definitions.

Underlying sets

Example

In a course in group theory, a lecturer may say at one point, “Let $F:G\to H$ be a homomorphism”, and at another point, “Let $g\in G$”.

In the first sentence, $G$ refers to the group, and in the second sentence it refers to the underlying set of the group.

This usage is almost universal. I think the difficulty it causes is subtle. When you refer to $\mathbb{R}$, for example, you (usually) are referring to the set of real numbers together with all its canonical structure. The way students think of it, a real number comes with its many relations and connections with the other real numbers, ordering, field properties, topology, and so on.

But in a group theory class, you may define the Klein $4$-group to be $\mathbb{Z}_2\times\mathbb{Z}_2$. Later you may say “the symmetry group of a rectangle that is not a square is the Klein $4$-group.” Almost invariably some student will balk at this.

Referring to a group by naming its underlying set is also an example of synecdoche.

Conjecture

Students expect every important set in math to have a canonical structure. When they get into a course that is a bit more abstract, suddenly the same set can have different structures, and math objects with different underlying sets can have the same structure. This catastrophic shift in a way of thinking should be described explicitly with examples.

Way back when, it got mighty upsetting when the earth started going around the sun instead of vice versa. Remind your students that these upheavals happen in the math world too.

Overloaded notation

Identity elements

A particular text may refer to the identity element of any group as $e$.

This is as far as I know not a problem for students. I think I know why: There is a generic identity element. The identity element in any group is an instantiation of that generic identity element. The generic identity element exists in the sketch for groups; every group is a functor defined on that sketch. (Or if you insist, the generic identity element exists in the first order theory for groups.) I suspect mathematicians subconsciously think of identity elements in this way.

Matrix multiplication

Matrix multiplication is not commutative. A student may forget this and write $(A^2B^2=(AB)^2$. This also happens in group theory courses.

This problem occurs because the symbolic language uses the same symbol for many different operations, in this case the juxtaposition notation for multiplication. This phenomenon is called overloaded notation and is discussed in abstractmath.org here.

Conjecture

Noncommutative binary operations written using juxtaposition cause students trouble because going to noncommutative operations requires abandoning some overlearned reflexes in doing algebra.

Identity elements seem to behave the same in any binary operation, so there are no reflexes to unlearn. There are generic binary operations of various types as well. That’s why mathematicians are comfortable overloading juxtaposition. But to get to be a mathematician you have to unlearn some reflexes.

Negation

Sometimes you need to reword a math statement that contains symbolic expressions. This particularly causes trouble in connection with negation.

Ordinary English

The English language is notorious among language learners for making it complicated to negate a sentence. The negation of “I saw that movie” is “I did not see that movie”. (You have to put “d** not” (using the appropriate form of “do”) before the verb and then modify the verb appropriately.) You can’t just say “I not saw that movie” (as in Spanish) or “I saw not that movie” (as in German).

Conjecture

The method in English used to negate a sentence may cause problems with math students whose native language is not English. (But does it cause math problems with those students?)

Negating symbolic expressions

Examples

  • The negation of “$n$ is even and a prime” is “$n$ is either odd or it is not a prime”. The negation should not be written “$n$ is not even and a prime” because that sentence is ambiguous. In the heat of doing a proof students may sometimes think the negation is “$n$ is odd and $n$ is not a prime,” essentially forgetting about DeMorgan. (He must roll over in his grave a lot.)
  • The negation of “$x\gt0$” is “$x\leq0$”. It is not “$x\lt0$”. This is a very common mistake.

These examples are difficulties caused by not understanding the math. They are not directly caused by difficulties with the languages of math.

Negating expressions containing parenthetic assertions

Suppose you want to prove:

“If $f:\mathbb{R}\to\mathbb{R}$ is differentiable, then $f$ is continuous”.

A good way to do this is by using the contrapositive. A mechanical way of writing the contrapositive is:

“If $f$ is not continuous, then $f:\mathbb{R}\to\mathbb{R}$ is not differentiable.”

That is not good. The sentence needs to be massaged:

“If $f:\mathbb{R}\to\mathbb{R}$ is not continuous, then $f$ is not differentiable.”

Even better would be to write the original sentence as:

“Suppose $f:\mathbb{R}\to\mathbb{R}$. Then if $f$ is differentiable, then $f$ is continuous.”

This is discussed in detail in David Butler’s post Contrapositive grammar.

Conjecture

Students need to be taught to understand parenthetic assertions that occur in the symbolic language and to learn to extract a parenthetic assertion and write it as a standalone assertion ahead of the statement it occurs in.

Scope

The scope of a word or variable consists of the part of the text for which its current definition is in effect.

Examples

  • “Suppose $n$ is divisible by $4$.” The scope is probably the current paragraph or perhaps the current proof. This means that the properties of $n$ are constrained in that section of the text.
  • “In this book, all rings are unitary.” This will hold for the whole book.

There are many more examples in the abstractmath.org article Scope.

If you are a grasshopper (you like to dive into the middle of a book or paper to find out what it says), knowing the scope of a variable can be hard to determine. It is particularly difficult for commonly used words or symbols that have been defined differently from the usual usage. You may not suspect that this has happened since it might be define once early in the text. Some books on writing mathematics have urged writers to keep global definitions to a minimum. This is good advice.

Finding the scope is considerably easier when the text is online and you can search for the definition.

Conjecture

Knowing the scope of a word or variable can be difficult. It is particular hard when the word or variable has a large scope (chapter or whole book.)

Variables

Variables are often introduced in math writing and then used in the subsequent discussion. In a complicated discussion, several variables may be referred to that have different statuses, some of them introduced several pages before. There are many particular ways discussed below that can cause trouble for students. This post is restricted to trouble in connection with the languages of math. The concept of variable is difficult in itself, not just because of the way the math languages represent them, but that is not covered here.

Much of this part of the post is based on work of Susanna Epp, including three papers listed in the references. Her papers also include many references to other work in the math ed literature that have to do with understanding variables.

See also Variables in abstractmath.org and Variables in Wikipedia.

Types

Students blunder by forgetting the type of the variable they are dealing with. The example given previously of problems with matrix multiplication is occasioned by forgetting the type of a variable.

Conjecture

Students sometimes have problems because they forget the data type of the variables they are dealing with. This is primarily causes by overloaded notation.

Dependent and independent

If you define $y=x^2+1$, then $x$ is an independent variable and $y$ is a dependent variable. But dependence and independence of variablesare more general than that example suggests.
In an epsilon-delta proof of the limit of a function (example below,) $\varepsilon$ is independent and $\delta$ is dependent on $\varepsilon$, although not functionally dependent.

Conjecture

Distinguishing dependent and independent variables causes problems, particularly when the dependence is not clearly functional.

I recently ran across a discussion of this on the internet but failed to record where I saw it. Help!

Bound and free

This causes trouble with integration, among other things. It is discussed in abstractmath.org in Variables and Substitution. I expect to add some references to the math ed literature soon.

Instantiation

Some of these variables may be given by existential instantiation, in which case they are dependent on variables that define them. Others may be given by universal instantiation, in which case the variable is generic; it is independent of other variables, and you can’t impose arbitrary restrictions on it.

Existential instantiation

A theorem that an object exists under certain conditions allows you to name it and use it by that name in further arguments.

Example

Suppose $m$ and $n$ are integers. Then by definition, $m$ divides $n$ if there is an integer $q$ such that $n=qm$. Then you can use “$q$” in further discussion, but $q$ depends on $m$ and $n$. You must not use it with any other meaning unless you start a new paragraph and redefine it.

So the following (start of a) “proof” blunders by ignoring this restriction:

Theorem: Prove that if an integer $m$ divides both integers $n$ and $p$, then $m$ divides $n+p$.

“Proof”: Let $n = qm$ and $p = qm$…”

Universal instantiation

It is a theorem that for any integer $n$, there is no integer strictly between $n$ and $n+1$. So if you are given an arbitrary integer $k$, there is no integer strictly between $k$ and $k+1$. There is no integer between $42$ and $43$.

By itself, universal instantiation does not seem to cause problems, provided you pay attention to the types of your variables. (“There is no integer between $\pi$ and $\pi+1$” is false.)

However, when you introduce variables using both universal and existential quantification, students can get confused.

Example

Consider the definition of limit:

Definition: $\lim_{x\to a} f(x)=L$ if and only if for every $\epsilon\gt0$ there is a $\delta\gt0$ for which if $|x-a|\lt\delta$ then $|f(x)-L|\lt\epsilon$.

A proof for a particular instance of this definition is given in detail in Rabbits out of a Hat. In this proof, you may not put constraints on $\epsilon$ except the given one that it is positive. On the other hand, you have to come up with a definition of $\delta$ and prove that it works. The $\delta$ depends on what $f$, $a$ and $L$ are, but there are always infinitely many values of $\delta$ which fit the constraints, and you have to come up with only one. So in general, two people doing this proof will not get the same answer.

Reference

Susanna Epp’s paper Proof issues with existential quantification discusses the problems that students have with both existential and universal quantification with excellent examples. In particular, that paper gives examples of problems students have that are not hinted at here.

References

A nearly final version of The Handbook of Mathematical Discourse is available on the web with links, including all the citations. This version contains some broken links. I am unable to recompile it because TeX has evolved enough since 2003 that the source no longer compiles. The paperback version (without the citations) can be bought as a book here. (There are usually cheaper used versions on Amazon.)

Abstractmath.org is a website for beginning students in abstract mathematics. It includes most of the material in the Handbook, but not the citations. The Introduction gives you a clue as to what it is about.

Two languages

My take on the two languages of math are discussed in these articles:

The Language of Mathematics, by Mohan Ganesalingam, covers these two languages in more detail than any other book I know of. He says right away on page 18 that mathematical language consists of “textual sentences with symbolic material embedded like ‘islands’ in the text.” So for him, math language is one language.

I have envisioned two separate languages for math in abstractmath.org and in the Handbook, because in fact you can in principle translate any mathematical text into either English or logical notation (first order logic or type theory), although the result in either case would be impossible to understand for any sizeable text.

Topics in abstractmath.org

Context-sensitive interpretation.

“If” in definitions.

Mathematical English.

Parenthetic assertion.

Scope

Semantic contamination.

Substitution.

The symbolic language of math

Variables.

Zooming and Chunking.

Topics in the Handbook of mathematical discourse.

These topics have a strong overlap with the topics with the same name in abstractmath.org. They are included here because the Handbook contains links to citations of the usage.

Context-sensitive.

“If” in definitions.

Parenthetic assertion.

Substitution.

Posts in Gyre&Gimble

Names

Naming mathematical objects

Rabbits out of a Hat.

Semantics of algebra I.

Syntactic and semantic thinkers

Technical meanings clash with everyday meanings

Thinking without words.

Three kinds of mathematical thinkers

Variations in meaning in math.

Other references

Contrapositive grammar, blog post by David Butler.

Proof issues with existential quantification, by Susanna Epp.

The role of logic in teaching proof, by Susanna Epp (2003).

The language of quantification in mathematics instruction, by Susanna Epp (1999).

The Language of Mathematics: A Linguistic and Philosophical Investigation
by Mohan Ganesalingam, 2013. (Not available from the internet.)

On the communication of mathematical reasoning, by Atish Bagchi, and Charles Wells (1998a), PRIMUS, volume 8, pages 15–27.

Variables in Wikipedia.

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 2.5 License.

Send to Kindle

Variations in meaning in math

Words in a natural language may have different meanings in different social groups or different places.  Words and symbols in both mathematical English and the symbolic language vary according to specialty and, occasionally, country (see convention, default).  And words and symbols can change their meanings from place to place within the same mathematical discourse (see scope).

This article mostly provides pointers to other articles in abstractmath.org that give more details about the ideas.

Conventions

A convention in mathematical discourse is notation or terminology used with a special meaning in certain contexts or in certain fields. Articles and books in a specialty do not always clue you in on these conventions.

Some conventions are nearly universal in math.

Example 1

The use of “if” to mean “if and only if” in a definition is a convention. More about this here. This is a hidden definition by cases. “Hidden” means that no one tells the students, except for Susanna Epp and me.

Example 2

Constants or parameters are conventionally denoted by a, b, … , functions by f, g, … and variables by x, y,…. More.

Example 3

Referring to a group (or other mathematical structure) and its underlying set by the same name is a convention.  This is an example of both synecdoche and context-sensitive.

Example 4

The meaning of ${{\sin }^{n}}x$ in many calculus books is:

  • The inverse sine (arcsin) if $n=-1$.
  • The mult­iplica­tive power for positive $n$; in other words, ${{\sin }^{n}}x={{(\sin x)}^{n}}$ if $n\ne -1$.

This, like Example 1, is a definition by cases. Unlike Example 1, calculus books often make it explicit. Explicit or not, this usage is an abomination.

Some conventions are pervasive among math­ematicians but different conventions hold in other subjects that use mathematics.

  • Scientists and engineers may regard a truncated decimal such as 0.252 as an approximation, but a mathematician is likely to read it as an exact rational number, namely $\frac{252}{1000}$.
  • In most computer languages a distinction is made between real numbers and integers;
    42 would be an integer but 42.0 would be a real number.  Older mathematicians may not know this.
  • Mathematicians use i to denote the imaginary unit. In electrical engineering it is commonly denoted j instead, a fact that many mathematicians are un­aware of. I first learned about it when a student asked me if i was the same as j.

Conventions may vary by country.

  • In France and possibly other countries schools may use “positive” to mean “nonnegative”, so that zero is positive. 
  • In the secondary schools in some places, the value of sin x may be computed clockwise starting at (0,1)  instead of counterclockwise starting at (1,0).  I have heard this from students. 

Conventions may vary by specialty within math.

Field” and “log” are examples. 

Defaults

An interface to a computer program may have many possible choices for the user to make. In most cases, the interface will use certain choices automatically when the user doesn’t specify them.  One says the program defaults to those choices.  

Examples

  • A word processing program may default to justified paragraphs and insert mode, but allow you to pick ragged right or typeover mode.
  • I have spent a lot of time in both Minne­sota and Georgia and the remarks about skiing are based on my own observation. But these usages are not absolute. Some affluent Geor­gians may refer to snow skiing as “skiing”, for example, and this usage can result in a put-down if the hearer thinks they are talking about water skiing. One wonders where the boundary line is. Perhaps people in Kentucky are confused on the issue.

  • There is a sense in which the word “ski” defaults to snow skiing in Minnesota and to water skiing in Georgia.
  • “CSU” defaults to Cleveland State University in northern Ohio and to Colorado State University in parts of the west.

Math language behaves in this way, too.

Default usage in mathematical discourse

Symbols

  • In high school, $\pi$ refers by default to the ratio of the circumference of a circle to its diameter.  Students are often quite surprised when they get to abstract math courses and discover the many other meanings of $\pi $ (see here).
  • Recently authors in the popular literature seem to think that $\phi$ (phi) defaults to the golden ratio.  In fact, a search through the research literature shows very few hits for $\phi$ meaning the golden ratio: in other words, it usually means something else. 
  • The set $\mathbb{R}$ of real numbers has many different group structures defined on it but “The group $\mathbb{R}$” essentially always means that the group operation is ordinary addition.  In other words, “$\mathbb{R}$” as a group defaults to +.  Analogous remarks apply to “the field $\mathbb{R}$”. 
  • In informal conversation among many analysts, functions are continuous by default.
  • It used to be the case that in informal conversations among topologists, “group” defaulted to Abelian group. I don’t know whether that is still true or not.

Remark

This meaning of “default” has made it into dictionaries only since around 1960 (see the Wikipedia entry). This usage does not carry a derogatory connotation.   In abstractmath.org I am using the word to mean a special type of convention that imposes a choice of parameter, so that it is a special case of both “convention” and “suppression of parameters”.

Scope

Both mathematical English and the symbolic language have a feature that is uncommon in ordinary spoken or written English:  The meaning of a phrase or a symbolic expression can be different in different parts of the discourse.   The portion of the text in which a particular meaning is in effect is called the scope of the meaning.  This is accomplished in several ways.

Explicit statement

Examples

  • “In this paper, all groups are abelian”.  This means that every instance of the word “group” or any symbol denoting a group the group is constrained to be abelian.   The scope in this case is the whole paper.   See assumption.
  • “Suppose (or “let” or “assume”) $n$ is divisible by $4$”. Before this statement, you could not assume $n$ is divisible by $4$. Now you can, until the end of the current paragraph or section.

Definition

The definition of a word, phrase or symbol sets its meaning.  If the word definition is used and the scope is not given explicitly, it is probably the whole discourse.

Example

“Definition.  An integer is even if it is divisible by 2.”  This is marked as a definition, so it establishes the meaning of the word “even” (when applied to an integer) for the rest of the text. 

If

Used in modus ponens (see here) and (along with let, usually “now let…”) in proof by cases.

Example(modus ponens)

Suppose you want to prove that if an integer $n$ is divisible by $4$ then it is even. To show that it is even you must show that it is divisible by $2$. So you write:

  • “Let $n$ be divisible by $4$. That means $n=4k$ for some integer $k$. But then $n=2(2k)$, so $n$ is even by definition.”

Now if you start a new paragraph with something like “For any integer $n\ldots$” you can no longer assume $n$ is divisible by $4$.

Example (proof by cases)

Theorem: For all integers $n$, $n^2+n+1$ is odd.

Definitions:

  • “$n$ is even” means that $n=2s$ for some integer $s$.
  • “$n$ is odd” means that $n=2t+1$ for some integer $t$.

Proof:

  • Suppose $n$ is even. Then

    \[\begin{align*}
    n^2+n+1&=4s^2+2s+1\\
    &=2(2s^2+s)+1\\
    &=2(\text{something})+1
    \end{align*}\]

    so $n^2+n+1$ is odd. (See Zooming and Chunking.)

  • Now suppose $n$ is odd. Then

    \[\begin{align*}
    n^2+n+1&=(2t+1)^2+2t+1+1\\
    &=4t^2+4t+1+2t+1+1\\
    &=2(2t^2+3t)+3\\
    &=2(2t^2+3t+1)+1\\
    &=2(\text{something})+1
    \end{align*}\]

    So $n^2+n+1$ is odd.

Remark

The proof I just gave uses only the definition of even and odd and some high school algebra. Some simple grade-school facts about even and odd numbers are:

  • Even plus even is even.
  • Odd plus odd is even.
  • Even times even is even.
  • Odd times odd is odd.

Put these facts together and you get a nicer proof (I think anyway): $n^2+n$ is even, so when you add $1$ to it you must get an odd number.

Bound variables

A variable is bound if it is in the scope of an integral, quantifier, summation, or other binding operators.  More here.

Example

Consider this text:

Exercise: Show that for all real numbers $x$, it is true that $x^2\geq0$. Proof: Let $x=-2$. Then $x^2=(-2)^2=4$ which is greater than $0$. End of proof.”

The problem with that text is that in the statement, “For all real numbers $x$, it is true that $x^2\geq0$”, $x$ is a bound variable. It is bound by the universal quantifier “for all” which means that $x$ can be any real number whatever. But in the next sentence, the meaning of $x$ is changed by the assumption that $x=-2$. So the statement that $x\geq0$ only applies to $-2$. As a result the proof does not cover all cases.

Many students just beginning to learn to do proofs make this mistake. Fellow students who are a little further along may be astonished that someone would write something like that paragraph and might sneer at them. But this common mistake does not deserve a sneer, it deserves an explanation. This is an example of the ratchet effect.

Variable meaning in natural language

Meanings commonly vary in natural language because of conventions and defaults. But varying in scope during a conversation seems to me uncommon.

It does occur in games. In Skat and Bridge, the meaning of “trump” changes from hand to hand. The meaning of “strike” in a baseball game changes according to context: If the current batter has already had fewer than two strikes, a foul is a strike, but not otherwise.

I have not come up with non-game examples, and anyway games are played by rules that are suspiciously like mathematical axioms. Perhaps you can think of some non-game occasions in which meaning is determined by scoping that I have overlooked.

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 2.5 License.


Send to Kindle